•
•
Stop the blades rotating before crossing surfaces other
than grass.
Maintenance and Storage
•
Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
When using any attachments, never direct discharge of
material toward bystanders nor allow anyone near the
machine while in operation.
•
Never store the equipment with fuel in the tank inside a
building where fumes may reach an open flame or
spark.
•
Never operate the machine with damaged guards,
shields, or without safety protective devices in place. Be
sure all interlocks are attached, adjusted properly, and
functioning properly.
•
•
Allow the engine to cool before storing in any
enclosure.
To reduce the fire hazard, keep the engine, silencer,
battery compartment and fuel storage area free of grass,
leaves, or excessive grease.
•
•
Do not change the engine governor settings or
overspeed the engine. Operating the engine at excessive
speed may increase the hazard of personal injury.
•
•
Check the grass catcher frequently for wear or
deterioration.
Before leaving the operator’s position:
–
–
stop on level ground;
Keep all parts in good working condition and all
hardware and hydraulic fittings tightened. Replace all
worn or damaged parts and decals.
disengage the power take-off and lower the
attachments;
–
–
change into neutral and set the parking brake;
stop the engine.
•
•
If the fuel tank has to be drained, do this outdoors.
Be careful during adjustment of the machine to prevent
entrapment of the fingers between moving blades and
fixed parts of the machine.
•
•
Disengage drive to attachments when transporting or
not in use.
•
•
Disengage drives, disengage the cutting unit, set
parking brake, stop engine and disconnect spark plug
wire. Wait for all movement to stop before adjusting,
cleaning or repairing.
Stop the engine and disengage drive to attachment
–
–
–
before refuelling;
before removing the grass catcher/catchers;
Clean grass and debris from cutting unit, drives,
mufflers, and engine to help prevent fires. Clean up oil
or fuel spillage.
before making height adjustment unless adjustment
can be made from the operator’s position.
–
–
–
before clearing blockages;
•
•
Carefully release pressure from components with stored
energy.
before checking, cleaning or working on the mower;
Disconnect battery and remove spark plug wire before
making any repairs. Disconnect the negative terminal
first and the positive last. Reconnect positive first and
negative last.
after striking a foreign object or if an abnormal
vibration occurs. Inspect the mower for damage and
make repairs before restarting and operating the
equipment.
•
•
Use care when checking the reel. Wear gloves and use
caution when servicing them.
•
Reduce the throttle setting during engine run-out and, if
the engine is provided with a shut-off valve, turn the
fuel off at the conclusion of mowing.
Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
•
•
Keep hands and feet away from the cutting unit.
Slow down and use caution when making turns and
crossing roads and sidewalks. Stop reels if not mowing.
Toro Mower Safety
•
•
•
Do not operate the mower under the influence of
alcohol or drugs
The following list contains safety information specific to
Toro products or other safety information that you must
know that is not included in the CEN, ISO, or ANSI
standard.
Use care when loading or unloading the machine into a
trailer or truck
Use care when approaching blind corners, shrubs, trees,
or other objects that may obscure vision.
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
4
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04048, Toro 04052, Toro 04060, Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 800 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)