8.
To push or pull the machine easier without starting the
engine, adjust the belt guide (Fig. 41, inset) as follows:
1
A. Engage the clutch.
B. Loosen the capscrew securing the idler pulley and
belt guide to the idler arm.
2
C. Rotate the belt guide clockwise until a gap of
approximately 0.06 in. (0.15 cm) is obtained
between the guide finger and the backside of the
drive belts.
D. Tighten the capscrew and locknut securing the idler
pulley and belt guide to the idler arm.
9.
Close the cover and secure the retainer.
Figure 40
1.
V-belt cover
2.
Retainer
Replacing the Differential Belt
3.
To increase belt tension, loosen the engine mounting
bolts and move engine backwards in the slots.
1. Remove the capscrews securing the traction drive and
reel drive belt covers to the right side plate and remove
the belt covers.
Important
Do not over tension the belt.
2.
Loosen the idler pulley mounting nut, on each idler
pulley, and pivot each idler pulley counterclockwise
away from the backside of each belt to release belt
tension.
4.
Tighten the mounting bolts.
Note: The distance between the centers of the driver and
the driven pulleys should be approximately 5.18 in.
(13.15
cm) after new V-belts are installed.
3.
4.
Remove the belts.
5.
6.
After tensioning the primary V-belts, check the
alignment of the engine output shaft pulley and the
countershaft pulley with a straight edge.
Remove the capscrews securing the front and rear
sections of the differential cover to the differential
housing and slide the cover sections away to expose the
belt (Fig. 42).
If the pulleys are misaligned, loosen the screws securing
the engine mounting base to the mower frame and slide
the engine from side to side until the pulleys are aligned
within 0.030 in. (0.07 cm).
3
1
2
1
2
3
Figure 41
Figure 42
1.
2.
Primary V-belts
Belt guide
3. Idler pulley
1.
2.
Differential cover sections
Front clutch housing
3.
Right rear bearing
housing
7.
Tighten the mounting screws and check the alignment.
28
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04048, Toro 04052, Toro 04060, Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 800 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)