2.
3.
To stop the traction drive, release the traction lever.
Check to ensure that the speed selector operates
properly:
•
If the snowthrower does not move or moves
forward when it is in Position R1, remove the
trunnion from the speed selector lever, turn the
trunnion downward (clockwise) on the speed
control rod, then install the trunnion.
G001308
Figure35
•
If the snowthrower does not move or moves
rearward when it is in Position 1 (forward), remove
the trunnion from the speed selector lever, turn the
trunnion upward (counterclockwise) on the speed
control rod, then install the trunnion.
Momentarily squeezing and releasing the left or right wheel
clutch lever also allows for steering adjustments to keep the
snowthrower going in a straight line, especially in deep snow.
Squeezing both wheel clutch levers simultaneously
disengages the drive to both wheels. This enables you
to manually move the snowthrower backward without
stopping to shift it into a reverse gear. It also allows you to
maneuver and transport the snowthrower more easily when
the engine is not running.
Note: Refer to Installing the Traction Control
Linkage.
Note: If the snowthrower moves when the
traction lever is in the released position, check the
traction cable (refer to Checking and Adjusting
the Traction Cable) or take the snowthrower to an
Authorized Service Dealer for service.
OperatingtheSpeedSelector
The speed selector has 6 forward and 2 reverse gears. To
change speeds, release the traction lever and shift the speed
selector lever to the desired position (Figure 36). The lever
locks in a notch at each speed selection.
UsingtheWheelClutchLevers
The wheel clutch levers allow you to momentarily disengage
the drive to one or both wheels with the traction drive lever
still engaged. This enables you to turn and maneuver the
snowthrower easily.
Note: Holding down the traction lever against the handle
engages the traction drive to both wheels.
To turn the snowthrower to the right, lift up on the right
wheel clutch lever and squeeze it toward the handle (Figure
34).
G001012
Figure36
OperatingtheAuger/Impeller
Drive
1.
To engage the auger/ impeller drive, squeeze the right
hand (auger/ impeller) lever to the handgrip (Figure 37).
G001307
Figure34
Note: This disengages the drive to the right wheel while
the left wheel continues driving, and the snowthrower turns
to the right.
Note: Similarly, squeezing the left wheel clutch lever turns
G001013
the snowthrower to the left.
Figure37
When you complete the turn, release the wheel clutch lever,
and the drive re-engages both wheels (Figure 35).
2.
To stop the auger and impeller, release the right hand
lever.
13
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38640, Toro Power Max 1028LXE |
| Model Number | 38640 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 260000001 - 260999999 |
| Product Name | Toro Power Max 1028 LXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | LH358SA-159625A |
| Engine Motor Size | 358cc |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)