4.
5.
If the auger/impeller cable is not properly adjusted, do
the following steps:
Loosen the jam nut (Figure 48).
2
1
2
1
G001021
Figure45
1.
Jamnut
2. Turnbuckle
CheckingandAdjustingthe
Auger/ImpellerCable
G001024
Check and adjust the auger/impeller cable after the first
2
operating hours, then yearly thereafter.
Figure48
1.
Jamnut
2. Turnbuckle
1.
Remove the 2 screws from the right side of the belt
cover as shown.
6.
Loosen or tighten the turnbuckle that adjusts the
tension on the cable (Figure 48).
2.
Lift up the right side of the belt cover (Figure 46).
7.
8.
9.
Adjust the turnbuckle until you obtain the proper gap.
Tighten the jam nut.
Insert the 2 screws you previously removed on the belt
cover.
10.
If the auger/impeller cable is properly adjusted but a
problem remains, contact an Authorized Service Dealer.
CheckingtheAugerGearbox
OilLevel
G001022
Figure46
Check the auger gearbox oil yearly and add oil if necessary.
3.
With the auger/impeller lever disengaged, ensure that
the gap between the auger clutch assembly and the tab
is 1/16 inch (1.5 mm) (Figure 47).
1.
2.
Move the snowthrower to a level surface.
Clean the area around the pipe plug (Figure 49).
1/16 inch (1.5 mm)
1
G001025
G001023
Figure49
Figure47
1.
Tab
3. Remove the pipe plug from the gearbox.
18
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38640, Toro Power Max 1028LXE |
| Model Number | 38640 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 260000001 - 260999999 |
| Product Name | Toro Power Max 1028 LXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | LH358SA-159625A |
| Engine Motor Size | 358cc |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)