Safety
Before Operating
Caution: Improper use may result
in loss of finger, hands, or feet.
Read and understand the contents of this
manual before operating the snowthrower.
Become familiar with all controls and know
how to stop the engine quickly.
There is a high-speed
impeller close to the
opening.
Operator’s
Position
The low-speed auger has a moving pinch
point close to the opening.
This snowthrower meets or exceeds the B71.3
specifications of the American National Standards
Institute in effect at the time of production.
• Keep the area of operation clear of all persons
(particularly small children) and pets.
•
Exercise caution to avoid slipping or falling, especially
when operating the snowthrower in reverse.
Read and understand the contents of this manual
before the engine is ever started.
Preparation
• Thoroughly inspect the area where you will use the
snowthrower. Remove all doormats, sleds, boards,
wires, and other foreign objects.
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
•
Before starting the engine, disengage all clutches. Shift
the snowthrower into neutral as well, if applicable.
Improperly using or maintaining this snowthrower
could result in injury or death. To reduce this potential,
comply with the following safety instructions.
•
Do not operate the snowthrower without wearing
adequate winter garments. Wear footwear that will
improve your footing on slippery surfaces.
The following instructions have been adapted from the
ANSI/OPEI standard B71.3-1995 and the ISO 8437:1989
standard.
• Handle fuel with care; it is highly flammable.
–
–
–
Use an approved fuel container.
Training
Never add fuel to a running or hot engine.
•
Read the operator’s manual carefully. Be thoroughly
familiar with the controls and the proper use of the
equipment. Know how to stop the unit and disengage
the controls quickly.
Fill the fuel tank outdoors with extreme care. Never
fill the fuel tank indoors.
–
Replace the fuel tank cap securely and wipe up any
spilled fuel.
•
Never allow children to operate the snowthrower.
Never allow adults to operate the snowthrower without
proper instruction.
•
Use only the power cord supplied with the snowthrower
and a receptacle appropriate for use with the power
cord for electric-start motors.
2
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 38640, Toro Power Max 1028LXE |
Model Number | 38640 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Serial Number | 260000001 - 260999999 |
Product Name | Toro Power Max 1028 LXE Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | Snowthrower, Two Stage Power Max |
Swath | 28 inch |
Discharge | Two Stage |
Engine Manufacturer | Tecumseh |
Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
Engine Motor Model # | LH358SA-159625A |
Engine Motor Size | 358cc |
Engine Motor Type | 4 Cycle CARB2, EPA2 |
Transmission Speed | 6 Forward/2 Reverse |
Transmission Type | Friction Disc |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)