Important: Do not clean the electrodes because
grit could enter the cylinder and damage the
engine.
3. Grasp the cable conduit and move it toward the front of
the machine until the discharge chute latch fully engages
the gear teeth (Figure 55 and Figure 56).
4.
Set the gap between the electrodes on the spark plug at
0.030
inch (0.76 mm) (Figure 53).
1
1
G001029
Figure53
2
1.
0.030inch(0.76mm)
G001032
5.
Install the spark plug by hand and then torque it to 15
ft-lb (20.4 N·m).
Figure56
1.
Dischargechutelatch
2. Gearteeth
Note: If you do not have a torque wrench, tighten
the plug firmly.
Note: The latch is spring loaded and will naturally
move into the teeth of the gear (Figure 56).
AdjustingtheDischargeChute
Latch
4.
5.
Remove any slack in the cable by pulling the cable
conduit rearward.
Tighten the bolt on the cable clamp.
If the discharge chute does not lock into the desired
position or does not unlock so that you can move it to
another position, adjust the discharge chute latch.
6. Install and secure the gear cover.
1.
Remove the fastener on the gear cover (Figure 54), lift
the front of the cover up, and slide it back and out of
the way.
ReplacingtheDriveBelts
If the auger/impeller drive belt or the traction drive belt
becomes worn, oil-soaked, or otherwise damaged, go to
www.Toro.com for additional service information or have
an Authorized Service Dealer replace the belt.
ReplacingtheHeadlightBulb
Use a GE 892 16W halogen light bulb. Do not touch the
bulb with your hands or allow dirt or moisture to come into
contact with the bulb.
G001030
Figure54
1.
Remove the wire connector from the back of the
headlight (Figure 57).
2.
Loosen the bolt on the cable clamp (Figure 55).
G001037
Figure57
2
1
2.
Turn the base of the bulb counterclockwise until it
stops (Figure 58).
G001031
Figure55
1.
Cableconduit
2. Cableclamp
20
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38640, Toro Power Max 1028LXE |
| Model Number | 38640 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 260000001 - 260999999 |
| Product Name | Toro Power Max 1028 LXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | LH358SA-159625A |
| Engine Motor Size | 358cc |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)