8.
Checking the Skids
5.
Move the speed selector to the Position 1; refer to
Operating the Speed Selector.
Procedure
6. Squeeze the left hand (traction) lever to the hand-grip
(Figure 19).
Refer to Checking and Adjusting the Skids in
Maintenance.
The snowthrower should move forward. If the
snowthrower does not move or moves rearward,
complete the following:
9.
Checking the Traction Drive
A. Release the traction lever and stop the engine.
Operation
B. Disconnect the trunnion from the speed selector
lever (Figure 11).
Procedure
C. Turn the trunnion upward (counterclockwise) on
the speed control rod (Figure 11).
D. Connect the trunnion to the speed selector lever
(Figure 11).
If the traction drive is not properly adjusted,
the snowthrower may move in the direction
opposite of what you intended, causing injury
and/or property damage.
7.
If you made any adjustments, repeat this procedure
until no adjustments are required.
Important: If the snowthrower moves when the
traction lever is in the released position, check the
traction cable (refer to Checking and Adjusting
the Traction Cable) or take the snowthrower to an
Authorized Service Dealer for service.
Carefully check the traction drive and adjust it
properly, if necessary.
1.
2.
Start the engine; refer to Starting the Engine.
Move the speed selector to Position R1; refer to
Operating the Speed Selector.
3.
Squeeze the left hand (traction) lever to the hand-grip
(Figure 19).
Figure 19
The snowthrower should move rearward. If the
snowthrower does not move or moves forward,
complete the following:
A. Release the traction lever and stop the engine.
B. Disconnect the trunnion from the speed selector
lever (Figure 11).
C. Turn the trunnion downward (clockwise) on the
speed control rod (Figure 11).
D. Connect the trunnion to the speed selector lever
(Figure 11).
4.
Release the traction lever.
11
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38651, Toro Power Max 1128OXE |
| Model Number | 38651 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999 |
| Product Name | Toro Power Max 1128 OXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Engine Motor Model # | OH318SA-221847B |
| Engine Motor Size | 318cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Power Max® HD 1128 OXE is the biggest piece of juck for the money, the scrapper has a very week spring and starts backing off and the machine starts heading for the stars, or leaves enough snow so you have to do the job twice