5.
6.
If the oil level is low, add GL-5 or GL-6, SAE 85-95
EP transmission oil to the gearbox until the point
of overflow.
Note: Do not use synthetic oil.
Install the pipe plug in the gearbox.
Changing the Engine Oil
Service Interval: After the first 2 hours
Yearly
If possible, run the engine just before changing the
oil because warm oil flows better and carries more
contaminants.
Figure 48
1.
Jam nut
2.
Turnbuckle
Max. fill: 26 oz. (0.77 l), type: automotive detergent
oil with an API service classification of SF, SG, SH, SJ,
SL, or higher.
6.
Loosen or tighten the turnbuckle that adjusts the
tension on the cable (Figure 48).
•
•
For temperatures above 32°F (0°C), use SAE 30W.
7.
Adjust the turnbuckle until you obtain the proper
gap.
For temperatures between 0°F and 32°F (-18°C to
0°C), use SAE 5W30 or SAE 10W.
8.
9.
Tighten the jam nut.
Insert the 2 screws you previously removed on the
belt cover.
•
For air temperatures below 0°F (-18°C), use
SAE 0W30.
10.
If the auger/impeller cable is properly adjusted but
a problem remains, contact an Authorized Service
Dealer.
1.
Clean the area around the oil drain cap (Figure 50).
Checking the Auger Gearbox
Oil Level
Figure 50
Service Interval: Yearly—Check the auger gearbox oil
and add oil if necessary.
1.
Oil drain cap
1.
2.
Move the snowthrower to a level surface.
2.
3.
Slide an oil drain pan under the drain extension and
remove the oil drain cap.
Clean the area around the pipe plug (Figure 49).
Drain the oil.
Note: Dispose of the used oil properly at a local
recycling center.
4.
5.
Install the oil drain cap.
Fill the crankcase with oil. Refer to Filling the
Engine Crankcase with Oil.
Lubricating the Hex Shaft
Figure 49
Service Interval: Yearly
3.
4.
Remove the pipe plug from the gearbox.
Lightly lubricate the hex shaft yearly with automotive
engine oil (Figure 51).
Check the oil level in the gearbox. The oil should be
at the point of overflowing at the filler opening.
21
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38651, Toro Power Max 1128OXE |
| Model Number | 38651 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999 |
| Product Name | Toro Power Max 1128 OXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Engine Motor Model # | OH318SA-221847B |
| Engine Motor Size | 318cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Power Max® HD 1128 OXE is the biggest piece of juck for the money, the scrapper has a very week spring and starts backing off and the machine starts heading for the stars, or leaves enough snow so you have to do the job twice