Toro Power Max 1128 OXE 38651 Snow Blower Operators Manual, 2008

6.
7.
Lift up on the speed control rod and insert the
trunnion into the hole in the speed selector lever
(Figure 11).
Note: If the trunnion does not fit into the hole
when you lift up on the speed control rod, rotate the
trunnion upward or downward on the speed control
rod until it fits.
Secure the trunnion and upper end of the speed
control rod with the outer washer and a hairpin
cotter you previously removed.
Figure 14
Note: For easier installation, look down through
the opening in the speed selector (Figure 13).
1.
Short rod
2.
Long chute control rod
4.
Insert the front end of the rod into the opening in
the back of the chute gear cover until it slides into
the chute gear (Figure 15).
Figure 13
1.
Speed selector
4.
Installing the Chute Control
Rod
Figure 15
2
2
Carriage bolts
Locknuts
5.
6.
Align the holes in the nested ends of the rods and
insert 2 carriage bolts (in the loose parts bag) through
the short rod from the left side of the snowthrower
(from the operating position).
Procedure
1.
Unwrap the Quick Stick and rotate it so that it is
upright and in the center.
Insert the cable clip that supports the deflector
cable onto the forward carriage bolt, and secure the
carriage bolts with locknuts from the loose parts bag
(Figure 16).
2.
Hold the blue trigger cap down and pull the lever
fully rearward.
Note: The discharge chute and deflector should
face forward. If they do not, hold the blue trigger
cap down (but do not move the Quick Stick) and
rotate the discharge chute until they do.
3.
Align the flattened back end of the long chute
control rod with the flattened front end of the short
rod that extends from the control panel so that they
nest together (Figure 14).
9
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38651
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number280000001 - 280999999
Product NameToro Power Max 1128 OXE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesTwo Stage Power Max
Swath28 inch
DischargeTwo Stage
Engine ManufacturerTecumseh
Engine Oil Type26 oz. (.8l) 5w-30 or 10w / API SH or higher
Engine Motor Model #OH318SA-221847B
Engine Motor Size318cc
Engine Motor Type4 Cycle CARB3, EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

One thought on “Toro Power Max 1128 OXE 38651 Snow Blower Operators Manual, 2008

  1. Power Max® HD 1128 OXE is the biggest piece of juck for the money, the scrapper has a very week spring and starts backing off and the machine starts heading for the stars, or leaves enough snow so you have to do the job twice

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website