Checking the Engine Oil Level
Service Interval: Before each use or daily—Check
the engine oil level and add oil if
necessary.
1.
Remove the dipstick, wipe it clean, then fully install
the dipstick.
Figure 42
2.
Remove the dipstick and check the oil level
(Figure 41). If the oil level is below the Add mark
on the dipstick, add oil. Refer to Filling the Engine
with Oil.
1. Skid
4.
Push down on the handles to allow the pivoting
scraper to move fully forward, then set the front of
the snowthrower down so that the front edge of the
pivoting scraper contacts the ground (Figure 43).
Figure 43
Figure 41
1.
Pivoting scraper
5.
Move the skids down until they are even with the
ground.
Checking and Adjusting the
Skids
Note: For a smooth surface, you can set the skids
slightly higher to increase the scraping action, but
set the skids far enough down to prevent the auger
blades from contacting the ground.
Service Interval: Yearly—Check the skids and adjust
them if necessary.
Check the skids to ensure that the auger does not
contact the paved or gravel surface. Adjust the skids as
needed to compensate for wear.
Note: The pivoting scraper on the snowthrower is
not recommended for use on gravel surfaces. But if
you must use the snowthrower on a gravel surface,
adjust the skids further down to prevent the pivoting
scraper from picking up rocks.
1.
Check the tire pressure. Refer to Checking the Tire
Pressure.
2.
3.
Move the snowthrower to a level surface.
6.
Firmly tighten the nuts that secure both skids to the
auger sides.
Loosen the nuts that secure both skids to the
auger sides until the skids slide up and down easily
(Figure 42).
Note: If the skids become excessively worn, you
can turn them over and set the unused side toward
the pavement.
19
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38651, Toro Power Max 1128OXE |
| Model Number | 38651 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999 |
| Product Name | Toro Power Max 1128 OXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Engine Motor Model # | OH318SA-221847B |
| Engine Motor Size | 318cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Power Max® HD 1128 OXE is the biggest piece of juck for the money, the scrapper has a very week spring and starts backing off and the machine starts heading for the stars, or leaves enough snow so you have to do the job twice