2.
3.
Move the speed selector to Position R1; refer to
Operating the Speed Selector.
Squeeze the left hand (traction) lever to the hand-grip
(Figure 12).
Figure 11
1.
Cable clip
2.
Deflector cable
7.
Hold the blue trigger cap down and rotate the Quick
Stick in a circle to ensure that the chute and deflector
operate smoothly.
Figure 12
4.
Checking the Tire Pressure
The snowthrower should move rearward. If the
snowthrower does not move or moves forward,
complete the following:
Procedure
A. Release the traction lever and stop the engine.
The tires are overinflated at the factory for shipping.
Reduce the pressure equally in both tires to between 17
and 20 psi (116 and 137 kPa).
B. Disconnect the trunnion from the speed selector
lever (Figure 6).
C. Turn the trunnion downward (clockwise) on the
speed control rod (Figure 6).
5.
Checking the Skids and
Scraper
D. Connect the trunnion to the speed selector lever
(Figure 6).
Procedure
4.
Release the traction lever.
Refer to Checking and Adjusting the Skids and Scraper
in Maintenance.
5. Move the speed selector to the Position 1; refer to
Operating the Speed Selector.
6.
Squeeze the left hand (traction) lever to the hand-grip
(Figure 12).
6.
Checking the Traction Drive
Operation
The snowthrower should move forward. If the
snowthrower does not move or moves rearward,
complete the following:
Procedure
A. Release the traction lever and stop the engine.
B. Disconnect the trunnion from the speed selector
lever (Figure 6).
If the traction drive is not properly adjusted,
the snowthrower may move in the direction
opposite of what you intended, causing injury
and/or property damage.
C. Turn the trunnion upward (counterclockwise) on
the speed control rod (Figure 6).
D. Connect the trunnion to the speed selector lever
(Figure 6).
Carefully check the traction drive and adjust it
properly, if necessary.
7. If you made any adjustments, repeat this procedure
until no adjustments are required.
Important: To operate the traction drive, you
must operate the snowthrower with the self-propel
feature engaged. Refer to Freewheeling or Using
the Self-propel Drive.
Important: If the snowthrower moves when the
traction lever is in the released position, check the
traction cable (refer to Checking and Adjusting
the Traction Cable) or take the snowthrower to an
Authorized Service Dealer for service.
1.
Start the engine; refer to Starting the Engine.
10
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38610, Toro Power Max 6000 |
| Model Number | 38610 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Product Name | Toro Power Max 6000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 084333-0197-E1 |
| Engine Motor Size | 141cc |
| Engine Motor Type | 2 Cycle EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)