3.
Remove the fasteners on the right belt cover,
then remove the cover in the sequence shown in
Figure 37.
Figure 39
1.
Jam nut
2.
Turnbuckle
7.
Loosen or tighten the turnbuckle that adjusts the
tension on the cable (Figure 39).
Note: Ensure that the cable does not twist.
8.
Adjust the turnbuckle until you obtain the proper
gap.
Figure 37
9.
Tighten the jam nut.
4.
With the auger/impeller lever disengaged, ensure
that the gap between the auger clutch assembly and
the tab is 1/16 inch (1.5 mm) (Figure 38).
10.
11.
12.
Insert the left belt cover into place.
Insert the right belt cover into place.
Secure the front engine cover to the rear engine
cover using the fasteners previously removed.
13.
14.
Secure the left and right belt covers using the
fasteners previously removed
If the auger/impeller cable is properly adjusted but
a problem remains, contact an Authorized Service
Dealer.
Checking the Auger Gearbox
Oil Level
Figure 38
1.
Tab
Service Interval: Yearly—Check the auger gearbox oil
and add oil if necessary.
5.
6.
If the auger/impeller cable is not properly adjusted,
do the following steps:
1.
2.
Move the snowthrower to a level surface.
Loosen the jam nut (Figure 39).
Clean the area around the pipe plug (Figure 40).
19
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38610, Toro Power Max 6000 |
| Model Number | 38610 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Product Name | Toro Power Max 6000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 084333-0197-E1 |
| Engine Motor Size | 141cc |
| Engine Motor Type | 2 Cycle EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)