Figure 36
1.
Reel drive belt
2.
Bearing housing mounting
nuts
Figure 38
1.
Traction drive belt cover
B. Using a 3/8 inch drive torque wrench, rotate the
bearing housing with 35-40 in.-lb. of torque to
set belt tension (Figure 37).
2.
Check tension by depressing belt (Figure 39) at mid
span of pulleys with 4 ± 1 lb of force. Belt should
deflect 3/16 to 5/16 inch (4.8 to 7.9 mm). If the
deflection is incorrect, proceed to next step.
Figure 37
1.
Bearing housing
2. 3/8" Torque wrench here
C. While holding the torque wrench setting, tighten
the bearing housing mounting nuts (Figure 36).
Do not over-tension belt.
Figure 39
1.
Traction drive belt
D. Install belt cover.
3.
To adjust belt tension:
Traction Drive Belt
A. On back side of side plate, loosen the bolt
securing the idler bracket to the side plate
(Figure 40).
1.
Remove belt cover mounting fasteners and belt
cover to expose belt (Figure 38).
26
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04019, Toro 04024, Toro 04025, Toro 04202, Toro 04206, Toro 04207, Toro 04208, Toro Greensmaster |
| Model Year | 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)