at a time, until paper is pinched lightly, when inserted
from the front, parallel to the bedknife. A slight drag
will be noted as the paper is pulled.
Figure 50
1.
Sideplate mounting bolts
Figure 52
Important: Whenever the cutting unit has to
be tipped to expose bedknife/reel, prop up rear
of cutting unit to make sure nuts on back end
of bedbar adjusting screws are not resting on
work surface.
Note: Each time adjusting screw is rotated one click
clockwise, the bedknife moves .0007 inch closer to
reel. Do not overtighten the adjusting screws.
Adjusting the Bedknife to the
Reel
5. Check for light contact at other end of reel using
paper and adjust as required.
6.
After adjustment is accomplished, check to see if reel
can pinch paper when inserted from the front and cut
paper when inserted at a right angle to the bedknife
(Figure 52). It should be possible to cut paper with
minimum contact between the bedknife and the reel
blades. Should excessive reel drag be evident it will
be either necessary to backlap or regrind the cutting
unit to achieve the sharp edges needed for precision
cutting (see Toro reel sharpening manual).
Bedknife to reel adjustment is accomplished by
loosening or tightening bedbar adjusting screws, located
on top of mower.
1.
2.
Position machine on a flat, level work surface.
Make sure reel contact is removed by turning bedbar
adjusting screws counterclockwise (Figure 51).
Adjusting the Height of Cut
For heights of cut greater than .500", the high height
of cut kit must be installed.
1.
Loosen locknuts securing height-of-cut arms to
cutting unit side plates (Figure 53).
Figure 51
1.
Bedbar adjusting screw
3.
4.
Tilt mower on back to expose bedknife and reel.
At one end of reel, insert a long strip of newspaper
between reel and bedknife (Figure 52). While slowly
rotating reel forward, turn bedbar adjusting screw
clockwise (on same end of reel) (Figure 51), one click
30
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04019, Toro 04024, Toro 04025, Toro 04202, Toro 04206, Toro 04207, Toro 04208, Toro Greensmaster |
| Model Year | 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)