Figure 55
4.
Rotate adjusting screw until roller contacts front of
gauge bar. Adjust both ends of roller until entire
roller is parallel to the bedknife.
Figure 53
1.
2.
Rear roller bracket
Height-of-cut arm
3.
4.
Locknut
Adjusting screw
Important: When set properly, the rear and
front rollers will contact the gauge bar and the
screw will be snug against the bedknife. This
ensures that the height-of-cut is identical at both
ends of the bedknife.
2.
Loosen nut on gauge bar (Figure 54) and set
adjusting screw to desired height-of-cut. Distance
between bottom of screw head and face of bar is
height-of-cut.
5. Tighten nuts to secure adjustment. Do not
overtighten nut. Tighten enough to remove play
from washer.
Note: Use the following chart to determine which
bedknife is best suited for the desired height of cut.
Figure 54
1.
2.
Gauge bar
3. Nut
Height adjusting screw
3.
Hook screw head on cutting edge of bedknife and
rest rear end of bar on rear roller (Figure 55).
31
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04019, Toro 04024, Toro 04025, Toro 04202, Toro 04206, Toro 04207, Toro 04208, Toro Greensmaster |
| Model Year | 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)