Figure 48
1.
2.
Spacer
3.
Roller bracket
Sideplate mounting flange
Figure 46
1.
Transmission coupling
•
Position the spacer below the sideplate mounting
flange when height of cut settings range from
7.
Reverse procedure to install cutting unit.
1/8"
to 1" (Figure 49).
Note: When tightening the pivot arm mounting
fasteners, use an adjustable end wrench to hold the
pivot arm parallel to the side plate (Figure 47).
Figure 49
1.
2.
Sideplate mounting flange
Spacer
3. Roller bracket
2.
To adjust rear roller proceed as follows:
•
•
•
•
Raise rear of cutting unit and place a block under
bedknife.
Remove (2) nuts securing each roller bracket and
spacer to each sideplate mounting flange.
Figure 47
Lower roller and screws from sideplate mounting
flanges and spacers.
Place spacers onto screws on roller brackets.
Adjusting the Rear Roller
• Re-secure roller bracket and spacers to underside
of sideplate mounting flanges with nuts
previously removed.
1.
Adjust the rear roller brackets to the low or high
position depending on desired height of cut range
(Figure 48and Figure 49).
3.
Verify that the bedknife to reel contact is correct. Tip
mower to expose front and rear rollers and bedknife.
•
Position the spacer above the sideplate mounting
flange (factory setting) when height of cut
settings range from 1/16 to 1/4" (Fig. 10).
Note: The position of the rear roller to the
reel is controlled by the machining tolerances of
the assembled components and paralleling is not
required. A limited amount of adjustment is possible
by setting the cutting unit on a surface plate and
loosening the sideplate mounting bolts (Figure 50).
Adjust and re-tighten bolts.
29
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04019, Toro 04024, Toro 04025, Toro 04202, Toro 04206, Toro 04207, Toro 04208, Toro Greensmaster |
| Model Year | 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)