Assembling the Bedbar
Backlapping the Reel
1.
Install bedbar, positioning mounting ears between
washer and bedbar adjuster.
1.
Remove plug from the reel drive cover on the left
side of reel assembly (Figure 61)
2.
Secure bedbar to each side plate with bedbar bolts
(jam nuts on bolts) and 8 washers. A nylon washer
is to be positioned on each side of side plate boss.
Place a steel washer outside each of the nylon
washers. Torque bolts to 240-320 in.-lb.
3.
Tighten the jam nut until the end play is removed
from the outside thrust washers. Do not overtighten.
Note: It is acceptable that the inside thrust washers
on the cutting unit may remain loose.
4.
5.
Tighten spring tension nut until spring is collapsed,
then back off 1/2 turn.
Figure 61
Adjust bedbar; refer to Adjusting the Bedknife to
the Reel.
1.
Reel drive cover plug
2.
Insert a 18 mm socket onto hex flange nut on left
end of reel shaft.
Adjusting the Cut-Off Bar
Adjust cut-off bar to assure clippings are cleanly
discharged from the reel area:
3. Backlap according to the procedure in the Toro
Sharpening Reel and Rotary Mowers Manual, Form
No. 80-300 PT.
1.
Loosen screws securing top bar (Figure 60) to
cutting unit.
Contact with the reel or other moving parts can
result in personal injury.
•
•
Stay away from the reel while backlapping.
Never use a short handled paint brush for
backlapping. Part No. 29-9100 Handle
assembly complete or individual parts are
available from your local Authorized Toro
Distributor.
Note: For a better cutting edge, run a file across
the front face of the bedknife when the lapping
operation is completed. This will remove any burrs
or rough edges that may have built up on the cutting
edge.
Figure 60
1.
Cut-off bar
2.
Insert .060 inch feeler gauge between top of reel and
bar and tighten screws. Ensure bar and reel are equal
distance apart across complete reel.
4.
Reinstall plug when backlap operation is completed.
Note: The bar is adjustable to compensate for
changes in turf conditions. The bar should be
adjusted closer to reel when turf is extremely dry.
By contrast, adjust bar further away from reel when
turf conditions are wet. The bar should be parallel to
reel to ensure optimum performance and should be
adjusted whenever reel is sharpened on a reel grinder.
34
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04019, Toro 04024, Toro 04025, Toro 04202, Toro 04206, Toro 04207, Toro 04208, Toro Greensmaster |
| Model Year | 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)