OPERATION
The auger control is located on the left handle. Squeeze the control
tHrottLe Co ntroL
grip against the handle to engage the augers and start snow throwing
action. Release to stop.
driVe Co ntro L/ aUger Co ntro L Lo Ck
DRIVE
CONTROL
The throttle control is located on the rear of the engine. It regulates the
speed of the engine and will shut off the engine when moved into the
STOP position.
Primer
Depressing the primer forces fuel directly into the
engine’s carburetor to aid in cold-weather starting.
GO
reCo iL starter HandLe
This handle is used to manually start the engine.
The drive control is located on the right handle. Squeeze the control
grip against the handle to engage the wheel drive. Release to stop.
Release both controls to stop the augers and wheel drive.
eLeCtriC starter bUtto n
Pressing the electric starter button engages the engine’s electric
starter when plugged into a 120V power source.
NOTE: Always release the drive control before changing speeds.
Failure to do so will result in increased wear on your machine’s drive
system.
eLeCtriC starter oUtLet
Requires the use of a three-prong outdoor extension cord (included)
and a 120V power source/wall outlet.
CHUte direCtio naL Co ntro L
CHUTE DIRECTIONAL CONTROL
o iL fiLL
Engine oil level can be checked and oil added through the oil fill.
ADJUSTABLE
DISCHARGE
LEFT
DISCHARGE
RIGHT
CHUTE TILT
gas CaP
Unthread the gas cap to add gasoline to the fuel tank.
aUgers
When engaged, the augers rotate and draw snow into the auger
housing.
The chute directional control is located on left side of the snow thrower.
To change the direction in which snow is thrown, turn chute directional
control as follows:
CHUte assembLy
Snow drawn into the auger housing is discharged out the chute
assembly.
•
•
Crank clockwise to discharge to the left.
Crank counterclockwise to discharge to the right.
aUger Co ntro L
AUGER
skid sHo es
CONTROL
Position the skid shoes based on surface conditions. Adjust upward
for hard-packed snow. Adjust downward when operating on gravel or
crushed rock surfaces.
GO
13
| Categories | Craftsman Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Craftsman 247.88955 |
| Model Number | 247.88955 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Español |
| Product Name | Craftsman 24-Inch Snow Thrower |
| Product Brand | Craftsman. Customer Service Representatives are available by phone: Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Swath | 24 inch |
| Engine Manufacturer | Craftsman |
| Engine Oil Type | SAE 5W30, 4-Cycle Engine Oil (Quart) Recommended for Temperature: - Above 32°F: SAE 30W Straight Grade; - 0°F to 32°F: SAE 5W-30 or SAE 10W-30 Multi Grade; - Below O°F: SAE 0W-30 Synthetic |
| Engine Motor Model # | ZS365-SUA |
| Document File Type | |
| Publisher | craftsman.com |
| Wikipedia's Page | Craftsman (tools) |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)