4
Auger Control Handle
Recoil Starter
Know
Key
Your Snow
Thrower
Primer
Gasoline Cap
Electric Starter
Button (if equipped)
Chute Assembly
Choke Lever
WARNING
Be familiar with
all the controls on
the snow thrower
and their proper
operation. Know how
to stop the machine
and disengage them
quickly.
Spark Plug Access
Shave Plate
Oil Fill
Auger
Figure 4
Choke Lever
Auger
Activating choke control closes the choke plate on
carburetor and aids in starting engine. Refer to the engine
manual packed with unit for more detailed instructions.
When engaged, the augers rotation draws snow into the
auger housing and throws it out the discharge chute.
Rubber paddles on the augers also aid in propelling the
unit as they come in contact with the pavement.
Primer
Depressing primer forces fuel directly into engine’s
carburetor to aid in cold-weather starting. Refer to engine
manual packed with unit for more detailed instructions.
Auger Control Handle
Located on the upper handle, the auger control handle
is used to engage and disengage drive to the auger.
Squeeze the control handle against the upper handle to
engage auger; release it to disengage.
Ignition Key
The ignition key must be inserted and snapped in place
in order for the engine to start. Remove the ignition key to Discharge Chute / Chute Handle
Rotate the discharge chute to the left or right using
chute handle. The angle of the discharge chute controls
the distance that the snow is thrown. Tilt the discharge
chute up for greater distance; tilt down for less distance.
Loosen the hand knob on the side of the discharge
chute to adjust. Tilt the chute to the desired position,
and tighten the knob.
prevent unauthorized use of equipment. Do NOT attempt
to turn the key.
Recoil Starter
The starter handle is used to manually start the engine.
Electric Starter (If Equipped)
Used to start engine with a 120V power source.
Shave Plate
Plug for Electric Start
The shave plate maintains contact with pavement as
the snow thrower is propelled, allowing snow close to
pavement’s surface to be discharged.
Requires use of a three-prong outdoor extension cord
and a 120V power source.
Spark Plug Cover
Remove spark plug cover to access spark plug.
7
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)