Aryyvtps
yh
trqvhrr
rr)
rpvvtruq
Xh
vt
Felling a tree that has a diameter greater
than the length of the guide bar requires
use of either the sectioning felling cut or
plunge-cut method. These methods are
extremely dangerous because they
involve the use of the nose of the guide
bar and can result in kickback. Only
properly trained professionals should
attempt these techniques.
Avoid repositioning the saw more than
necessary. When repositioning for the
next cut, keep the guide bar fully enga-
ged in the kerf to keep the felling cut
straight. If the saw begins to pinch, insert
a wedge to open the cut. On the last cut,
do not cut the hinge.
First, cut a large, wide felling notch.
Make a plunge cut in the center of the
notch.
The plunge cut is made with the guide
bar nose. Begin the plunge cut by
applying the lower portion of the guide
bar nose to the tree at an angle. Cut until
the depth of the kerf is about the same as
the width of the guide bar. Next, align
the saw in the direction in which the re-
cess is
Qytrpruq
Timber having a diameter more than
twice the length of the guide bar requires
the use of the plunge-cut method before
making the felling cut.
to be cut.
For the sectioning method make the first
part of the felling cut with the guide bar
fanning in toward the hinge. Then, using
the bumper spike as a pivot, reposition
the saw for the next cut.
With the saw at full throttle, insert the
guide bar in the trunk.
Enlarge the plunge cut as shown in
illustration.
!
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL 036 QS |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)