PvyRhv
8
y
9
vt7
rhxvQr
vq
9
vtPr
hv
A factory new machine should not be
run at high revs (full throttle off load)
for the first three tank fillings. This avoids
unnecessary high loads during the
break-in period.
8urpxpuhvrvs
rry
A new chain has to be retensioned more
often than one that has been in use for
some time.
8uhvpyq)
As all moving parts have to bed in
during the break-in period, the frictional
resistances in the engine are greater
during this period. The engine develops
its maximum power after about 5 to 15
tank fillings.
Tension is correct when chain fits snugly
against the underside of the bar and can
still be pulled along the bar by hand.
Retension if necessary -
see section “Tensioning the Saw Chain”.
8uhvhr
hvtrr
h
r)
The chain stretches and begins to sag.
The drive links must not come out of the
bar groove - the chain may otherwise
jump off the bar.
9hxrurv
ryrhr
hpuvrrhhh
rvp
rhrv
r
uvpyqqhhtrurrtvr
rrrpv³6qwvt8h
i
r
´
1
Retension the chain -
see section “Tensioning the Saw Chain”.
D
h)Always disengage the
chain brake before opening the
throttle. Running the engine at higher
revs with the chain brake engaged
(saw chain at a standstill) will quickly
damage the engine and chain drive
(clutch, chain brake).
Different quantities of oil are required for
different bar lengths, types of wood and
cutting techniques.
Always slacken off the chain after
finishing work.
The chain contracts as it cools down.
If it is not slackened off, it can damage
the crankshaft and bearings.
Use the adjusting screw ( ) to vary the
oil feed rate as required.
•
Most economic setting -
turn adjusting screw to "@"
6sr
ytr
vq
(
@matic position).
ssyyu
yrr
hv
•
•
To increase oil feed -
turn adjusting screw clockwise.
To reduce oil feed -
turn adjusting screw counter-
clockwise.
Allow engine to run for a short while
at idle speed so that engine heat can
be dissipated by flow of cooling air.
This protects engine-mounted compo-
nents (ignition, carburetor) from
thermal overload.
Your chain must always be wetted with
a film of lubricant.
"%RT
"$
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL 036 QS |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)