Uhxvt8h
rsBvqr7h
•
6rr
h
riry
8 #A)
Hrh
rt
rqru
with scale on filing gauge* -
at nose of Duromatic bars -
in area used most for cutting
on Rollomatic bars.
It is advisable to fit the intake air prehea-
ting kit* if you use your saw in extremely
cold conditions (temperatures below
2
-10
°C /+14 °F, in powder or drifting
snow).
Chain
type
Pitch
Minimum
groove
depth
When fitted, the kit ensures that only
heated air is drawn in from around the
cylinder - it prevents air filter and
carburetor icing.
Rapid
3/8"
6.0 mm
If groove depth is less than specified:
The rotary shutter for carburetor prehea-
ting must be fully open when the intake
air preheating kit is fitted.
Sryhprurtvqrih
The drive link tangs will otherwise scrape
along the bottom of the groove -
the cutters and tie straps will not ride on
the bar rails.
1
3
If your saw is very cold (frost or ice on
machine), start the engine and keep it
at a high idle speed (with chain brake
disengaged) until it reaches normal
operating temperature.
•
U
urih
r -
every time you sharpen the chain -
and every time you replace the
chain -
this helps avoid one-sided wear,
especially at nose and underside
of the bar.
The air filter may load up faster when
you use intake air preheating - clean it
more frequently.
In the event of engine running problems,
first check that conditions for use of
intake air preheating still apply.
Regularly clean
2 oil inlet hole
!2
oilway
"2
bar groove.
*
Special accessory
* Special accessory
"'
"%RT
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL 036 QS |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)