STIHL FC 55 Edger Owners Manual

English / USA
Fitting the Edger Blade
1
7
5
6
10
6
4
7
9
:
Place the power edger on a
suitable support so that the blade
mounting (1) faces upwards.
4
2
8
3
:
Insert stop pin* or offset
:
Position blade (7) on the thrust
plate (8).
screwdriver* (2) as far as possible in
the bore (3) – push lightly and rotate
it back and forth together with the
thrust washer (4) until the drive shaft
is blocked.
Collar (see arrow) must engage
hole in blade.
:
:
:
Fit thrust washer (4) on the shaft (9).
Block the shaft.
Screw the nut (6) on to the shaft
counterclockwise and tighten down
firmly.
:
:
:
Fit combination wrench (5) on the
nut (6).
Loosen and remove the nut
clockwise (left-hand thread).
Remove the thrust washer.
If the cup spring (10) on the nut (6)
becomes fatigued, install a new nut.
*
see "Guide to Using this Manual"
FC 55
17
Product Specification
CategoriesSTIHL Straight Edger Manuals, Straight Edger Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 74 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website