English / USA
Replacing the Skirt
Replacing the Edger Blade
1
1
3
2
A
3
4
4
B
C
Removing the skirt
Fitting the skirt
A bent or cracked blade must not be
straightened or welded – it may shatter.
Such blades must be replaced – see
"Fitting the Edger Blade".
:
Release and remove screw (1)
:
Push the skirt (3) into the slot in the
deflector until it can be engaged on
the lug (4).
along with washer (2).
:
Pull the skirt (3) off the lug (4) and
STIHL recommends you use only
genuine STIHL edger blades – see
"Special Accessories".
out of the deflector
:
:
Fit the washer on the screw.
Insert screw and tighten it down
firmly.
:
Replace the blade (1) when its
length (A) is no longer sufficient to
maintain the necessary ground
clearance (B) and obtain the
required depth of cut (C).
5
3
To avoid out-of-balance:
check blade on a STIHL balancer –
see "Special Accessories".
Do not resharpen the blade!
Position of skirt
:
Position the skirt (3) correctly in
relation to depth wheel (5):
If wheel is on left, the skirt must
project to the right.
28
FC 55
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 55 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)