English / USA
Lubricating the
Gearbox
Rewind Starter
To help prolong the wear life of the
starter rope, observe the following
points:
:
:
:
:
Pull the starter rope only in the
direction specified.
2
Do not pull the rope over the edge of
the guide bushing.
Do not pull out the rope more than
specified since it might break.
Do not let the starter grip snap back,
guide it slowly into the housing.
See also chapter “Starting /
Stopping the Engine”!
1
1
Replace a damaged starter rope in
good time or have it replaced by your
STIHL dealer!
To reduce the risk of fire and burn
injury, use only spark plugs
:
:
Check grease level regularly, about
every 25 hours of operation.
authorized by STIHL. Always press
spark plug boot (2) snugly onto
spark plug terminal (1) of the proper
size. (Note: If terminal has
Unscrew the filler plug (1).
If no grease can be seen on the
inside of the filler plug,
screw the tube (2) of STIHL gear
lubricant for brushcutters – see
"Special Accessories" – into the filler
hole.
detachable SAE adapter nut, it must
be attached.)
A loose connection between spark
plug boot and ignition wire
:
:
Squeeze up to 1/5 oz (5 g) grease
connector in the boot may create
arcing that could ignite combustible
fumes and cause a fire.
into the gear housing.
Do not completely fill the gear
housing with grease.
Refit the filler plug and tighten it
down firmly.
26
FC 55
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 55 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)