English / USA
Operating Instructions
Cleaning the Air Filter
:
Refit the spark plug and connect the
During break-in period
spark plug boot – push it down
firmly.
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
:
:
Set the stop switch to I
Set choke lever to e – even if
engine is cold.
:
Now start the engine.
2
Fuel tank run until dry
:
During operation
After refueling, press the fuel pump
bulb at least five times – even if bulb
is filled with fuel.
1
After a long period of full-throttle
operation, allow engine to run for a while
at idle speed so that the heat in the
engine can be dissipated by flow of
cooling air. This protects engine-
mounted components (ignition,
:
Now start the engine.
carburetor) from thermal overload.
Dirty air filters reduce engine power
increase fuel consumption and make
starting more difficult.
After finishing work
Wait for engine to cool down. Drain the
fuel tank. Store the machine in a dry
place. Check tightness of nuts and
screws (not adjusting screws) at regular
intervals and retighten as necessary.
If there is a noticeable loss of engine
power
:
:
Set choke lever tog
Press in the tab (1) and swing the
filter cover (2) open.
:
Clean away loose dirt from around
the filter.
22
FC 55
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 55 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)