English / USA
Mounting the Loop Handle
Adjusting the Throttle
Cable*
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
Adjust the throttle cable only after
the unit is fully assembled – the
handle must be in the normal
operating position.
1
4
2
3
5
A
50 mm
( 2" )
:
Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
:
:
Fit the loop handle (1) on the drive
tube 8" / 20 cm (A) forward of the
control handle (2).
Position the clamp (3) against the
drive tube and slide it into the loop
handle.
:
Fit square nut (4) in the loop handle,
insert the clamp screw (5) from the
other side and tighten down
securely.
Adjusting loop handle to most
comfortable position:
:
:
Release clamp screw (5).
Move the loop handle along the
drive tube as required - retighten the
clamp screw.
*
see "Guide to Using this Manual"
FC 85
15
Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
---|---|
Tags | STIHL FC 85 |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)