English / USA
Carefully remove the parts of the old
spring from the starter cover and
rope rotor.
Installing the Rope Rotor
:
:
Insert the new rewind spring in the
rope rotor and, at the same time,
engage the outer spring loop in the
rotor’s recess – the wire retainer
slips off in this process.
a
If the spring pops out and uncoils,
refit it in the counterclockwise
direction, starting outside and
working inwards.
a = 2mm
(0.08 in)
:
:
Pull the rope through the rotor and
secure it with a simple overhand
knot.
:
:
Check dimension a for inner spring
anchor loop and bend it slightly if
necessary.
Coat rope rotor bearing bore with
non-resinous oil – see "Special
Accessories".
:
Go to "Installing the Rope Rotor".
Go to "Installing the rope rotor".
Installing rope rotor with rewind
spring
Replacing a Broken Rewind
Spring
:
Carefully unpack the new rope rotor
with rewind spring. The spring may
pop out if not handled with care –
risk of injury.
Two types of replacement spring are
available from the factory:
–
–
A ready-to-fit rewind spring secured
with a wire retainer.
:
:
Lubricate the spring with a few
drops of non-resinous oil – see
"Special Accessories".
8
A rope rotor with pre-installed
rewind spring.
Go to "Installing the Rope Rotor".
Installing the ready-to-fit rewind
spring
:
Lubricate the spring with a few
drops of non-resinous oil – see
"Special Accessories" – do not open
the wire retainer!
:
Slide the rotor onto the starter post –
turn it back and forth until the rewind
spring anchor loop (
8
) engages.
:
:
Insert the screw (5) and tighten it
down securely.
Go to "Tensioning the Rewind
Spring".
FC 85
27
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 85 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)