English / USA
When engine begins to fire:
:
Move the choke lever to e and
continue cranking.
As soon as engine runs:
:
Blip the throttle trigger – the slide
control moves to the run position # –
and the engine settles down to idle
speed.
Make sure the carburetor is correctly
adjusted – cutting tool must not rotate
when the engine is idling.
Your machine is now ready for
operation.
To shut down the engine:
:
Move the slide control in direction of
:
Place the unit on the ground: It must
:
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope all
the way – it might otherwise break.
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
c to $.
rest securely on the engine support
and the cutting tool deflector. Check
that the cutting tool is not touching
the ground or any other obstacles.
At very low outside temperatures:
As soon as engine runs:
:
:
Make sure you have a firm footing.
:
:
Blip the throttle trigger to disengage
:
the starting throttle position –
the slide control moves to the run
position # –
Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
Do not stand or kneel on the drive
tube! This could permanently
damage the drive tube..
Continue cranking until the engine
and the engine settles down to idle
speed.
runs.
:
Open the throttle slightly and allow
engine to warm up for a brief period.
20
FC 85
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 85 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)