STIHL FC 95 Edger Owners Manual

English / USA
Standard Setting
Fine Tuning
At high altitude
:    Turn high speed screw (H) clock-
wise (leaner) no further than stop
until there is no noticeable increase
in engine speed.
:
:
:
Shut off the engine.
A slight correction of the setting of the
high speed screw (H) may be necessary
if engine power is not satisfactory when
operating at high altitude or at sea level
or after changing the tool.
Mount cutting tool or attachment.
Check the air filter – clean or
replace if necessary.
At sea level
Turn high speed screw (H) counter-
:
:
:
Check adjustment of the throttle
cable and readjust if necessary –
see "Adjusting the Throttle Cable".
Rule of thumb
:
clockwise (richer) no further than
stop until there is no noticeable
increase in engine speed.
:
Turn high speed screw (H) about
a quarter turn for every 1000m
(3300 ft) change in altitude.
Check the spark arresting screen
(not installed in all countries) and
clean or replace if necessary.
It is possible that maximum engine
speed may be reached with the
standard setting in each case.
:
:
Carry out standard setting.
Carefully screw both adjusting
screws clockwise down onto their
seats.
Warm up engine for about 3
minutes.
:
Open the throttle wide
:
:
Open high speed screw (H)
turn.
Adjusting Idle Speed
3/4
It is usually necessary to change the
setting of the idle speed screw (LA)
after every correction to the low speed
screw (L).
Open low speed screw (L)
3/4
turn.
:
:
Start and warm up the engine
Adjust idle speed with the idle speed
screw (LA) so that the tool does not
rotate.
:
Warm up the engine for about
3
minutes.
Engine stops while idling
:
Turn idle speed screw (LA) slowly
clockwise until the engine runs
smoothly – the tool must not rotate.
24
FC 95
Product Specification
CategoriesSTIHL Straight Edger Manuals, Straight Edger Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 94 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website