English / USA
Storing the Machine
Replacing Wheels
:
When the starter rope is fully
For periods of about 3 months or longer
extended it must still be possible to
rotate the rotor another half turn. If
this is not the case, the spring is
overtensioned and could break.
Take one turn of rope off the rotor in
such a case.
:
Drain and clean the fuel tank in a
well ventilated area.
:
Dispose of remaining fuel and
cleaning solution properly in
accordance with local
1
2
environmental requirements.
:
:
Fit the starter cover on the housing.
Tighten down the screws firmly.
:
Run engine until carburetor is dry –
this helps prevent the carburetor
diaphragms sticking together.
Depth Wheel
:
:
Remove, clean and inspect the
cutting blade.
Have a worn wheel replaced by your
dealer. STIHL recommends that you
have all maintenance and repair work
performed by a STIHL servicing dealer.
Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
:
The end of the thread on screw (1)
is caulked to ensure that the
wingnut (2) does not work loose and
be lost.
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
A very high torque has to be applied
to remove the wingnut from the screw.
If the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by your
dealer
30
FC 95
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 95 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)