English / USA
Replacing the Cutting Blade Checking and Replacing
the Wear Guard
1
1
A
2
3
3
B
C
4
A bent or cracked blade must not be
straightened or welded – it may break
completely! Such blades must be
replaced – see “Fitting the Cutting
Blade”.
Checking the Wear Guard
Replacing the Wear Guard
Before every use:
:
Remove the cutting blade – see
chapter “Fitting the Cutting Blade”
:
Check the wear guard (1) for
:
:
:
Take out the screws (3).
damage.
Fit the new wear guard (4).
:
The wear guard must be replaced
as soon as the deflector (2) (arrow)
becomes visible at the latest.
STIHL recommends the use of genuine
STIHL cutting blades – see “Special
Accessories“
Insert screws and tighten down
firmly.
The gearbox may be seriously
damaged if you do not replace the
wear guard in good time.
:
Fit the blade – see chapter “Fitting
the Cutting Blade”.
:
Replace the blade (1) when its
length (A) is no longer sufficient to
maintain the necessary ground
clearance (B) and obtain the
required depth of cut (C).
To avoid out-of-balance:
check cutting blade on STIHL
balancer – see “Special
Accessories“.
Do not resharpen the blade!
FC 95
33
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 95 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)