English / USA
Spark Arresting Screen in
Muffler
Cutting tool rotates when engine is
idling
The spark arresting screen is an option
that is not fitted in all machines.
:
Turn idle speed screw (LA) slowly
counterclockwise until the tool stops
rotating and then turn the screw
about another 1/2 to 3/4 turn in the
same direction.
:
If the engine is low on power, check
the spark arresting screen in the
muffler.
:
Wait for muffler to cool down.
Erratic idling behavior, engine stops
even though setting of LA screw is
correct, poor acceleration
1
:
:
Remove the screw (4).
Lift spark arresting screen (5) and
Idle setting too lean:
pull it out.
:
Turn low speed screw (L)
counterclockwise (no further than
stop) until the engine runs and
accelerates smoothly.
:
Clean spark arresting screen if
necessary – if screen is damaged or
coked up, fit a new one.
:
:
:
Refit the spark arresting screen.
Insert screw and tighten down.
Fit the shroud.
:
:
Move slide control to STOP-O.
Remove the screw (1).
Erratic idling behavior
Idle setting too rich:
:
Turn low speed screw (L) clockwise
(no further than stop) until the
engine runs and accelerates
smoothly.
3
2
2
:
:
Remove the screws (2).
Lift away the shroud (3).
FC 95
25
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 95 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)