English
Definitions
12 Oilomatic Saw Chain.
22 Master Control Lever.
A loop consisting of cutters, tie
straps and drive links.
Lever for choke control, starting
throttle, run and stop switch
positions.
1
2
3
Shroud Twist Lock.
Lock for shroud.
13 Adjusting Wheel of Quick
Tensioner.
23 Throttle Trigger.
Carburetor Adjusting Screws.
Permits precise adjustment of chain
tension.
Controls the speed of the engine.
For fine tuning the carburetor.
24
25
Throttle Trigger Interlock.
Fuel Pump.
14
Handle of Wingnut of Quick
Tensioner.
Must be depressed before the
throttle trigger can be activated.
Fills carburetor with fuel to simplify
starting.
Must be released to allow chain to
be tensioned with adjusting wheel.
Rear Handle.
4
5
Shutter.
The support handle for the right
hand, located at or toward the rear
of the saw.
With summer and winter positions.
Carburetor is heated in winter
position.
15
16
Oil Filler Cap.
For closing the oil tank.
Muffler.
26 Rear Hand Guard.
Chain Brake.
Reduces engine exhaust noise and
directs the exhaust gases.
Gives added protection to
operator's right hand.
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
17 Front Hand Guard.
Guide Bar Nose
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar. It
also serves as the lever for chain
brake activation.
The exposed end of the guide bar.
(not illustrated, see chapter
"Tensioning the Saw Chain")
6
Chain Sprocket.
The toothed wheel that drives the
saw chain.
Clutch
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed. (not illustrated)
7
8
Chain Sprocket Cover.
Covers the clutch and the sprocket.
18
19
20
21
Front Handle.
Chain Catcher.
Handlebar for the left hand at the
front of the saw.
Anti-Vibration System
Helps to reduce the risk of operator
contact by a chain if it breaks or
comes off the bar.
The anti-vibration system includes a
number of buffers designed to
reduce the transmission of
vibrations created by the engine
and cutting attachment to the
operator's hands. (not illustrated)
Spark Plug Boot.
Connects the spark plug with the
ignition wire.
9
Chain Tensioner (lateral).
Permits precise adjustment of chain
tension.
Starter Grip.
The grip of the starter, for starting
the engine.
10
11
Bumper Spike.
Toothed stop for holding saw steady
against wood.
Fuel Filler Cap.
For closing the fuel tank.
Guide Bar.
Supports and guides the saw chain.
5
2
MS 171, MS 181, MS 181 C, MS 211, MS 211 C
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 171, STIHL MS 181, STIHL MS 211 |
| Download File |
|
| Language | English, EspanĚol |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)