English / USA
Operating Instructions
If the engine doesn’t start:
:
:
Unscrew and dry off the spark plug.
During break-in period
Set the Master Control lever to
If you did not move the Master Control
lever to “Warm Start” n quickly enough
after the engine began to fire, the
combustion chamber has flooded.
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
“Stop” position $
:
Press down the interlock lever, open
the throttle wide and, at the same
time, crank the engine several times
with the starter to clear the
combustion chamber.
1
:
:
Refit the spark plug and connect the
spark plug boot –
reassemble the other parts.
2
Do not make the mixture leaner to
achieve an apparent increase in
power – this could damage the
engine – see “Adjusting
Set Master Control lever to “Warm
Start” n – even if engine is cold.
:
:
Press in decompression valve.
Now start the engine.
Carburetor”.
:
:
Loosen knob (1) in direction of
arrow.
Always disengage the chain brake
before opening the throttle. Running
the engine at higher revs with the
chain brake engaged (saw chain at
a standstill) will quickly damage the
engine and chain drive (clutch,
chain brake).
Remove the carburetor box
cover (2).
3
:
Pull off the spark plug boot (3).
44
MS 280 C
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 280 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)