English / USA
Definitions
1.
2.
3.
Carburetor Box Cover Twist Lock
11. Bumper Spike
20.
Master Control Lever
Lever for choke control, starting
throttle, run and stop switch
positions.
Lock for carburetor box cover.
Toothed stop for holding saw steady
against wood.
Carburetor Adjusting Screws
For fine tuning the carburetor.
12. Guide Bar
Supports and guides the saw chain.
Spark Plug Boot
21. Throttle Trigger
Connects the spark plug with the
ignition wire.
13. Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
Controls the speed of the engine.
22.
Coasting Brake Activating Lever
(Throttle Trigger Interlock)
Must be depressed before the
throttle trigger can be activated.
Engages and disengages the
coasting brake.
4.
Decompression Valve
(automatically resetting)
Releases compression pressure to
make starting easier -
14. Oil Filler Cap
For closing the oil tank.
15.
16.
Muffler
when activated.
Reduces engine exhaust noise and
directs the exhaust gases.
5.
6.
Chain Sprocket Cover
23. Rear Handle
Covers the clutch and the sprocket.
The support handle for the right
hand, located at or toward the rear
of the saw.
Front Hand Guard
Chain Sprocket
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar. It
also serves as the lever for chain
brake activation.
The toothed wheel that drives the
saw chain.
24. Rear Hand Guard
Gives added protection to
operator's right hand.
7.
Chain Brake
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
Guide Bar Nose
17. Front Handle
The exposed end of the guide bar.
(not illustrated, see chapter
"Tensioning the Saw Chain")
Handlebar for the left hand at the
front of the saw.
8.
9.
Adjusting Wheel
Quick chain tensioner*.
18. Starter Grip
Clutch
The grip of the starter, for starting
the engine.
Chain Tensioner
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed. (not illustrated)
Permits precise adjustment of chain
tension.
19. Fuel Filler Cap
For closing the fuel tank.
10.
Chain Catcher
Anti-Vibration System
Helps to reduce the risk of operator
contact by a chain if it breaks or
comes off the bar.
The anti-vibration system includes a
number of Anti-Vibration elements
designed to reduce the
transmission of vibrations created
by the engine and cutting
attachment to the operator's hands.
(not illustrated)
*
see "Guide to Using this Manual"
62
MS 280 C
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 280 |
| Download File |
|
| Language | English, EspanĚol |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)