English / USA
Spark Arresting Screen*
in Muffler
Only machines with high speed
screw (H)
Machines with Intelligent Engine
Management
:
:
If the engine is low on power, check
the spark arresting screen in the
muffler.
Allow muffler to cool down.
Operation at High Altitude
A slight correction of the setting may be
necessary if engine power is not
satisfactory:
The carburetor adjusts automatically to
any change in operating conditions (e.g.
cutting at high altitude).
The automatic adjustment process can
be speeded up as follows:
2
:
:
:
Check the standard setting.
Warm up the engine.
Turn high speed screw (H) slightly
clockwise (leaner) – no further than
stop.
1
:
Run the engine for about 10
seconds at full throttle – with the
chain and bar mounted.
:
Perform five uniform cross cuts at
full throttle.
Remove the screw (1).
Pull out spark arresting screen (2).
If the setting is too lean there is
a risk of engine damage due to
insufficient lubrication and
overheating.
:
Clean spark arresting screen if
necessary – if screen is damaged or
coked up, fit a new one.
:
:
Refit the spark arresting screen.
Insert screw and tighten down.
*
see “Guide to Using this Manual”
MS 280 C
49
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 280 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)