English / USA
Oil Quantity
Control
After long period of full-throttle
operation
Oil Pump with Higher Flow Rate
(special option)
Allow engine to run for a short while at
idle speed so that engine heat can be
dissipated by flow of cooling air. This
protects engine-mounted components
(ignition, carburetor) from thermal
overload.
1
After finishing work
Different quantities of oil are required for
different bar lengths, types of wood and
cutting techniques.
:
Slacken off the chain if you have
retensioned it at operating
Oil pumps with a slot (2) in the
adjusting screw: When the pump is
set to range “a”, the oil tank may run
dry before the fuel tank and the
chain will not be lubricated.
temperature during cutting work.
:
Use the adjusting screw (1) (on
underside of machine) to vary the
oil feed rate as required.
The chain contracts as it cools
down. If it is not slackened off, it
could damage the crankshaft and
bearings.
:
E = Ematic position, medium oil flow
rate - turn adjusting screw to "E"
(Ematic position)
:
When using range “a“, either fill the
fuel tank to only half its normal
capacity or refill the oil tank when
the fuel tank is still about half full.
Storing your saw for a short period:
Wait for engine to cool down. To avoid
condensation, fill the fuel tank and keep
the machine in a dry place, well away
from sources of ignition, until you need it
again.
:
:
To increase oil feed – turn adjusting
screw clockwise.
To reduce oil feed – turn adjusting
screw counter-clockwise.
Your chain must always be wetted
with a film of lubricant.
Storing for a long period:
See “Storing the Unit”!
MS 460, MS 460 R
39
Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
---|---|
Tags | STIHL MS 460 |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)