English
N
N
Move the Master Control lever to the
stop position 0
Operating Instructions
Remove the spark plug – see
"Spark plug"
During break-in period
N
N
Dry spark plug
Crank the engine several times with
the starter – to clear the combustion
chamber
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
N
Pull the hand guard toward the
handlebar
N
N
Replace the spark plug – see
"Spark plug"
The chain brake is released – the chain
saw is ready for use.
Set the Master Control lever to
starting accelerationn – even if
the engine is cold
Open the throttle only when the
chain brake is off. Increased
engine speeds with the chain
brake on (saw chain is stationary)
lead to damage to the clutch and
chain brake.
N
N
Press the button on the
decompression valve
Do not make the mixture leaner to
achieve an apparent increase in
power – this could damage the
engine – see "Adjusting the
Carburetor".
Restart the engine
At very low outside temperatures
Always disengage chain brake
before accelerating the engine.
Running the engine at high revs
with the chain brake engaged
(chain locked) will quickly damage
the engine and chain drive (clutch,
chain brake).
N
let the engine warm up briefly with
the throttle slightly open
Switch off engine
N
N
Move the Master Control lever to the
stop position 0
During Operation
if necessary, configure for winter
operation, see "Winter Operation"
Check chain tension frequently
A new chain has to be retensioned more
often than one that has been in use for
some time.
If the engine does not start
The Master Control lever was not
returned from the position choke shutter
closedl to starting accelerationn in
time, the engine may be flooded.
MS 880
33
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 880 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)