English
Cutting attachment
Specifications
Displacement:
7.42 cu. in.
(121.6
cm3)
Bore:
2.36 in. (60 mm)
1.69 in. (43 mm)
Recommended cutting attachments in
compliance with Sec. 5.11 of ANSI
standard B 175.1-2000
Stroke:
EPA / CEPA
Engine power to 8.58 hp (6.4 kW) at
ISO 7293:
8,500 rpm
Observe the information about ANSI
standard B 175.1-2000 as well as the
definition "low-kickback saw chain" in
the section "Safety Instructions".
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Idle speed:
2,700 rpm
Maximum permis-
sible speed with
bar and chain:
11,500 rpm
In order to comply with the kickback
performance requirements of Sec. 5.11
of ANSI standard B 175.1-2000, do not
use replacement saw chains unless they
have been designated as meeting the
ANSI Sec. 5.11 requirements on this
specific powerhead, or have been
designated as "low kickback" saw
chains in accordance with the ANSI B
Ignition system
Category
A = 300 hours
B = 125 hours
C = 50 hours
Electronic magneto ignition
Spark plug
(suppressed):
NGK BPMR 7 A,
BOSCH WSR 6 F
Electrode gap:
0.02 in. (0.5 mm)
CARB
175.1-2000
standard.
Fuel system
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
All position diaphragm carburetor with
integral fuel pump
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Rollomatic "S" guide bars
Fuel tank capacity: 44.0 oz (1.3 l)
Fuel mixture:
See "Fuel mix"
STIHL reducedkickback bar (with green
label) for 3/8" pitch
Chain lubrication
Bar lengths:
21 in. (53 cm)
Shortblock
Groove width: 0.063 in. (1.6 mm)
Fully automatic, speed-controlled oil
pump with reciprocating piston –
additional manual oil flow control
STIHL single cylinder two-stroke engine
STIHL reduced kickback saw chain
(with yellow label) for 0.404" pitch
Bar
21, 25, 30, 33, 36, 41 in.
Oil tank capacity:
23.7 oz (0.7 l)
lengths:
(53, 63, 75, 84, 90, 105 cm)
Groove
width:
Weight
0.063 in. (1.6 mm)
dry, without bar and
chain:
21.6 lbs. (9.8 kg)
5
2
MS 880
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 880 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)