English
Tensioning the rewind spring
6
N
It must be possible to turn the rope
rotor on another half-turn when the
rope has been drawn out
completely. If not, the spring has
been tensioned too tightly and may
break. Remove one turn of the rope
from the rotor.
N
N
Insert the rewind spring – engage
outer spring loop over the lug – this
will simultaneously remove the wire
loop
Reinstall the rope rotor, tension the
rewind spring, replace the fan
housing and screw it into place
N
N
N
Mount the fan housing on the
crankcase
If the spring has popped out: refit it –
working counterclockwise – from the
outside inwards
Move the Master Control lever to the
stop position 0
Press the remaining rope into the
handle until the nippel (6) is flush
with the handle
N
N
Make a loop in the unwound starter
rope and use it to turn the rope rotor
five full revolutions in the direction of
the arrow
Replacing broken rewind spring
Hold the rope rotor tight: pull out the
twisted rope and untangle it
N
Remove the rope rotor as described
for "Replacing the starter rope".
N
N
Release the rope rotor
Slowly let go of rope so that it winds
onto the rotor
The broken pieces of spring may
still be under tension and can
spring apart unexpectedly on
removal from the housing – risk
of injury! Wear a face shield and
protective gloves.
The starter grip must be drawn firmly
into the rope guide bush. If it tips
sideways: increase the spring tension by
another turn.
N
N
Remove parts of spring
Apply a few drops of resin-free oil to
the new replacement spring – do not
open the wire loop (retainer)
4
2
MS 880
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 880 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)