English
Definitions
12 Oil Filler Cap.
22 Rear Handle.
For closing the oil tank.
The support handle for the right
hand, located at or toward the rear
of the saw.
1
2
Carburetor Box Cover Twist
Lock.
13 Muffler.
Reduces engine exhaust noise and
directs the exhaust gases.
Lock for carburetor box cover.
23 Rear Hand Guard.
Gives added protection to
operator's right hand.
Spark Plug Boot.
14 Front Hand Guard.
Connects the spark plug with the
ignition wire.
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar. It
also serves as the lever for chain
brake activation.
Guide Bar Nose.
The exposed end of the guide bar.
(not illustrated, see chapter
"Tensioning the Saw Chain")
3
4
5
Carburetor Adjusting Screws.
For fine tuning the carburetor.
Chain Sprocket Cover.
Clutch.
Covers the clutch and the sprocket.
15
16
Front Handle.
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed. (not illustrated)
Chain Sprocket.
Handlebar for the left hand at the
front of the saw.
The toothed wheel that drives the
saw chain.
Decompression Valve
(autmatically resetting).
Anti-Vibration System.
6
7
Chain Brake.
The anti-vibration system includes a
number of anti-vibration elements
designed to reduce the
transmission of vibrations created
by the engine and cutting
Releases compression pressure to
make starting easier - when
activated.
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
17
Starter Grip.
attachment to the operator's hands.
(not illustrated)
Chain Catcher.
The grip of the starter, for starting
the engine.
Helps to reduce the risk of operator
contact by a chain if it breaks or
comes off the bar.
18
19
Fuel Filler Cap.
For closing the fuel tank.
8
9
Chain Tensioner.
Master Control Lever.
Permits precise adjustment of chain
tension.
Lever for choke control, starting
throttle, run and stop switch
positions.
Bumper Spike.
Toothed stop for holding saw steady
against wood.
20
21
Throttle Trigger.
Controls the speed of the engine.
10
11
Guide Bar.
Throttle Trigger Interlock.
Supports and guides the saw chain.
Must be depressed before the
throttle trigger can be activated.
Oilomatic Saw Chain.
A loop consisting of cutters, tie
straps and drive links.
MS 880
51
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 880 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)