IMPORTANT: Mark the relative positions of the gear
teeth and the bearing blocks so they can be re-
assembled in the same position. Do not touch the
gearsurfacesasresidueonhandsmaybecorrosive
to gear finish.
1
8.
ing block to remove the bearing block and gear set (Fig.
82).
Placethemotoronitssideandpushontherearbear-
9.
Carefully remove and discard O--rings, pressure
2
seals and back--up rings (Fig. 83) from motor. Do not
cause any damage to the machined grooves during the
removal process.
Figure 82
1.
Motor body
2.
Bearing block & gear set
IMPORTANT: Make sure not to damage the counter
bore when removing the shaft seal from the front
plate.
10.Position
seal.
front flange with seal side up. Remove shaft
Inspection
1.
Remove any nicks and burrs from all motor compo-
nents with emery cloth.
CAUTION
Use eye protection such as goggles when using
compressed air.
Figure 83
2.
Clean all motor components with solvent. Dry all
parts with compressed air.
3.
Inspect drive gear, idler gear and bearing blocks
(Fig. 84) for the following:
1
A. Gear shafts should be free of rough surfaces and
excessive wear at bushing points and sealing areas.
Scoring, rough surfaces or wear on gear shafts indi-
cates need for replacement.
2
B. Gear teeth should be free of excessive scoring
and wear. Any broken or nicked gear teeth must be
replaced.
3
C. Inspect gear face edge for sharpness. Sharp
edges of gears will mill into bearing blocks and, thus,
must be replaced.
D. Bearing areas of bearing blocks should not have
excessive wear or scoring.
3
E. Face of bearing blocks that are in contact with
gears should be free of wear, roughness or scoring.
Figure 84
1.
2.
Drive gear
Idler gear
3.
Bearing block
4.
wear.
Inspect front flange and rear cover for damage or
Groundsmaster 4100--D
Page 4 -- 115
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30413, Toro Groundsmaster Groundsmaster 4100 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
At only 700mm wide the Mini Dumper is even at home on tight access
sites. No need to grunt, groan, and force the
mower about the yard. The US will be getting a revised 2011 Jeep Wrangler but the diesel option will not be offered in the United States.