Toro 08162SL Model 30413 Groundsmaster 4100 D Service Manual

IMPORTANT: Mark the relative positions of the gear
teeth and  the  bearing blocks  so they  can  be re-
assembled in the same position. Do  not touch the
gearsurfacesasresidueonhandsmaybecorrosive
to gear finish.
1
8.
ing block to remove the bearing block and gear set (Fig.
82).
Placethemotoronitssideandpushontherearbear-
9.
Carefully  remove  and discard  O--rings,  pressure
2
seals and back--up rings  (Fig. 83) from motor. Do  not
cause any damage to the machined grooves during the
removal process.
Figure 82
1.
Motor body
2.
Bearing block & gear set
IMPORTANT: Make sure not to damage the counter
bore when removing  the shaft seal from  the front
plate.
10.Position
seal.
front flange with seal side up. Remove shaft
Inspection
1.
Remove any nicks and burrs from all motor compo-
nents with emery cloth.
CAUTION
Use eye protection such as goggles when using
compressed air.
Figure 83
2.
Clean all  motor  components with  solvent. Dry  all
parts with compressed air.
3.
Inspect drive  gear,  idler gear  and bearing  blocks
(Fig. 84) for the following:
1
A.  Gear shafts should be free of rough surfaces and
excessive wear at bushing points and sealing areas.
Scoring, rough surfaces or wear on gear shafts indi-
cates need for replacement.
2
B.  Gear teeth should be free  of excessive scoring
and wear. Any broken or nicked gear teeth must be
replaced.
3
C. Inspect  gear  face  edge for  sharpness.  Sharp
edges of gears will mill into bearing blocks and, thus,
must be replaced.
D. Bearing areas of bearing blocks should not have
excessive wear or scoring.
3
E.  Face of bearing blocks  that are in  contact with
gears should be free of wear, roughness or scoring.
Figure 84
1.
2.
Drive gear
Idler gear
3.
Bearing block
4.
wear.
Inspect front flange  and rear cover  for damage or
Groundsmaster 4100--D
Page 4 -- 115
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 298 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

One thought on “Toro 08162SL Model 30413 Groundsmaster 4100 D Service Manual

  1. At only 700mm wide the Mini Dumper is even at home on tight access
    sites. No need to grunt, groan, and force the
    mower about the yard. The US will be getting a revised 2011 Jeep Wrangler but the diesel option will not be offered in the United States.

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website