P-150 Series Plastic Valves
4
0 and 50mm
Key Features:
• Heavy-duty glass-filled nylon (GFN) and
stainless-steel construction
• No external tubing for either electric or
pressure regulating models
• Proven, encapsulated, injection-molded
solenoid with captured hex plunger and spring
• Purple solenoid models available for effluent
applications
• Positive O-ring seal on inlet plug
• Unique 3-way SS bonnet screws accept
Phillips or hex driver tools
Optional Accessories:
• DC latching solenoid assembly
• 24 V DC solenoid
• Reclaimed water purple solenoid assembly
and tag
• 24 VAC potted solenoid
• 60cm (24”) wire leads
(
1½" and 2") Electric Models
1½"
and 2" in-line globe/angle valves
•
•
Globe/Angle configuration
Rated at 10 Bar (150 psi) with flows from
20 to 568 LPM (5 to 150 GPM)
for light commercial applications. The
P-150 Series valves are the "value" work
horses of plastic valves.
•
Water is filter-controlled to resist
contamination of solenoid port. Filter
serviceable from top of valve.
•
•
•
50/60Hz
Inrush: 0.37A, 8.8 VA
Holding: 0.3A, 7.2 VA
•
•
Slow closing design reduce water hammer
Specifications:
Precise pressure control option with compact
EZReg® dial-design (serviceable under
pressure— no need to shut down system)
•
Solenoid: 50Hz (24 VAC)
• EZR-30: 0.3-2 Bar (5-30 psi) pressure
regulation module
• EZR-100: 0.3-7 Bar (5-100 psi) pressure
regulation module
•
•
•
Inrush volt-amp: 50Hz (24 VAC) – 7.2 VA
Inrush current: .3A
Holding volt-amps: 50Hz (24 VAC) – 4.8
VA
•
Pressure regulates in electric and manual
modes, serviceable under pressure
Additional Features:
•
Holding current: .2A
•
Non-rising, manual flow control handle;
adjustable to zero flow
Manual internal bleed
Rugged Santoprene, double beaded
diaphragm
• Flow range: 19-568 LPM (5-150 GPM)
•
•
Pressure range: 1.4-10 Bar (20-150 PSI)
Body styles:
•
•
Globe/angle valve — 40 and 50mm
(1 1⁄2” and 2”) BSP female threads
EZReg
®
pressure-regulation
module
•
•
Encapsulated injection molded solenoid with
a captive hex plunger
Forward flow design for precise pressure
regulation
• Dimensions:
•
40mm—184mm x 92mm
(11⁄2” — 71⁄4” H x 35⁄8” W)
Effluent water solenoid
assembly and tag
available.
•
50mm—241mm x 156mm
(2” — 91⁄2” H x 61⁄8” W)
■ Flow rates are recommended not to exceed 0,35 Bar loss. Values shown in Bar.
P-150 Series Friction Loss Data (Metric – LPM Flow)
P-150 Series Valves – Specifying Information
For kPa values, multiply tabular values by 100. For Kg/cm2 values, multiply tabular values by 1,02.
P150 -
- X
P-150 Series Friction Loss Data (English – GPM Flow)
23
X
Type
Configura-
tion
Solenoid
Size
Size
Configuration
20
30
40
50
60
70
80
100
120
150
P150−P-150 Series 23−BSP, Electric. 5−50 Hz Solenoid
Plastic Valve
6−40 mm (1
1
⁄2")
Globe
Angle
3.14
3.10
3.11
3.36
2.59
2.37
2.67
1.72
3.77
2.22
5.09
3.10
6.40
3.98
1½"
6—Less Solenoid 8−50 mm (2")
For Example: When specifying a 50 mm (2") P-150 Series Plastic Valve with BSP
threads and 50 Hz solenoid, you would specify:
P150–23–58
Globe
Angle
3.20
2.63
3.33
2.62
2.86
2.24
2.81
1.88
2.87
1.97
4.39
2.67
6.20
3.82
9.68
5.67
2"
Note: For optimum performance when designing a system, be sure to calculate total friction loss to ensure sufficient downstream pressure. For
optimum regulation performance, size regulating valves toward the higher flow ranges.
60
■ Flow rates are recommended not to exceed 5 PSI loss. Values shown in PSI.
| Categories | Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)