Yard Machines E600E E610E E640F E660G Snow Blower Owners Manual, MTD

IMPORTANT: Attach the shift rod and clutch cables
as  follows. THEN CHECK  THE  ADJUSTMENTS AS
INSTRUCTED,  AND   MAKE  ANY   FINAL  ADJUST-
MENTS NECESSARY  BEFORE OPERATING  YOUR
SNOW THROWER.  Failure to  follow  the instructions
may cause damage to the snow thrower.
Traction
Drive
Clutch
Shift Lever
ATTACHINGTHE SHIFT ROD (Hardware D)
Hairpin
Clip
Flat
1.  Place the  shift lever (on  the handle panel)  in the
sixth (6) speed position (all the way forward).
Washer
Ferrule
2.  Place  the bent  end  of the  shift  rod (E)  into  the
hole  in the  shift  arm  assembly.  See Figure  11.
Secure with  flat washer and hairpin clip.
Shift
Arm
Assembly
Shift
Rod
3.
Start  threading the  ferrule onto the  other end  of
the shift rod. Push down on the shift rod (and shift
arm assembly) as far as it will go.
4
Thread the  ferrule onto the shift  rod until the  fer-
rule lines up with  the upper hole in the shift lever
(beneath the handle panel). Insert  the ferrule into
the upper hole  in the shift lever  from the left side
when   adjustment  is   correct.  Secure   with   flat
washer and hairpin clip.
Figure 11
Make  certain to  check  for correct  adjustment  of the
shift rod as  instructed in the Final Adjustment  section
before operating the snow thrower.
FINAL ADJUSTMENTS
Auger Drive Clutch
To  check  the adjustment  of  the  auger  drive  clutch,
push forward on the left hand  clutch grip (depress the
rubber bumper).  There should  be slack  in the  cable.
Release the clutch  grip. The cable should be straight.
Make certain  you can depress  the auger drive  clutch
grip against the left handle completely.
“Z” End
Hex Jam
Nut
If necessary,  loosen the  hex jam  nut and  thread the
cable in (for less slack) or out (for more  slack) as nec-
essary. Refer  to Figure  12. Recheck  the adjustment.
Tighten  the jam  nut  against the  cable  when correct
adjustment is reached.
Cable is Straight
Figure 12
9
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, Yard Machines Snow Blower Manuals
Tags, , , , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandYard Machines, E600E, E610E, E640F, E660G, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website