ATTACHING CLUTCH CABLES
1.
Thread the hex jam nuts all the way up the
threaded portion of the “Z” ends.
Chute
Assembly
2.
Make certain all cables are in the grooves of the
cable roller guides. The roller guides are located
in the lower rear of the unit. Lift the clutch grip in
the raised (up) position.
Hex Bolt
3.
Thread the cable onto the threaded portion of
the “Z” end until there is no slack in the cable,
but the cable is NOT tight. Do not overtighten
cable. See Figure 13.
Hex Lock Nut
WARNING: If cable is tightened so
there is tension on the cable with the
clutch grip released, the safety features
of the snow thrower may be overridden.
Chute Flange
Keeper
Figure 14
ATTACHING THE CHUTE CRANK
(Hardware C)
1.
Insert hex bolt through the upper chute crank
bracket (located on the chute crank).
See Figure 15.
“Z” End
Lock Washer
Hex Nut
Hex Jam
Nut
Hex Bolt
Cable is
Straight
Upper Chute
Crank Bracket
Figure 13
Figure 15
4.
When correct adjustment is reached, tighten the
hex nut against the cable to lock it in position.
2.
3.
Place the hex bolt into the hole provided in the
left handle. Secure with lock washer and hex
nut. Do not tighten at this point.
Loosen the carriage bolts and hex lock nuts
which secure the lower chute crank bracket to
the extension on the left side of the chute
assembly. See Figure 16.
ATTACHING THE CHUTE ASSEMBLY
(Hardware B)
1.
Place chute assembly over chute opening, with
the opening in the chute assembly facing the
front of the unit.
Carriage Bolts
Hex Lock Nuts
2.
3.
Place chute flange keepers beneath lip of chute
assembly, flat side down.
Insert hex bolt up through chute flange keeper
and chute assembly as shown in Figure 14.
Secure with hex lock nut.
Lower
Chute
Crank
4.
After assembling all three chute flange keepers,
tighten all nuts and bolts securely, then back off
1/4
turn to allow easier movement.
Bracket
Figure 16
9
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals, Yard Machines Snow Blower Manuals |
|---|---|
| Tags | MTD 614E, MTD E642E, MTD E644E, MTD E662H, MTD E664F, MTD Snow Blower Manual, Yard Machines 614E, Yard Machines E642E, Yard Machines E644E, Yard Machines E662H, Yard Machines E664F |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Yard Machines, 614E, E642E, E644E, E662H, E664F, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)