Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD

.
Figure 18
Figure 17
Skid Shoes
Drive Control
When the drive control is released and in the
disengaged “up” position, the cable should have very
little slack. It should NOT be tight.
NOTE:  The  space  between  the  skid  shoes  and  the
ground can be adjusted. See Figure 19. For close snow
removal,  place  skid   shoe  in  the  low  position.   Use
middle  or  high  position  when  area  to  be  cleared  is
uneven.
Check the adjustment of the drive control as follows:
1.
With the drive control disengaged,
push the snow thrower gently
NOTE: Some models are equipped with reversible skid
shoes  and   may  be   turned  over   to   increase  their
lifespan. See Figure 19.
forward. The unit should roll freely.
Engage the drive control and gently
attempt to push the snow thrower
forward. The wheels should not turn.
The unit should not roll freely.
With the drive control disengaged, move the shift
lever back and forth between the R2 position and
the F6 position several times. There should be no
resistance in the shift lever.
2.
CAUTION: Loose gravel can be picked up
and thrown by the auger, causing injury to the
operator and bystanders and/or damage to
the snow thrower and surrounding property.
Disengaged
3.
•
•
•
Adjust skid shoes by loosening the four hex nuts
(two on each side) and carriage bolts. Move skid
shoes to desired position.
Make certain the entire bottom surface of skid shoe
is against the ground to avoid uneven wear on the
skid shoes. Retighten nuts and bolts securely.
Retighten the hex jam nut and repeat all three tests
to verify proper adjustment has been achieved.
If any of the above tests failed, the drive cable is in need
of adjustment. refer to Figure 18 and proceed as
follows:
•
Loosen the hex jam nut on the auger control cable
“Z” fitting and rotate the coupling end (without
turning the cable) of the cable downward to
provide more slack or upward to take up slack. See
Figure 18 .
Auger Control
Refer to Auger Control Test on Page 12 to adjust the auger
control.
Standard
Reversible
Figure 19- Skid Shoes
15
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, Yardworks Snow Blower Manuals
Tags, , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 52 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandYardworks, 60-3753-6, 60-3754-4, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(8 votes, average: 3.88 out of 5)
Lawn and Garden readers have rated Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD 3.9 out of 5.0 based on 8 product reviews.
Submit your review (optional)
(will not be displayed)
12345
* Required Field
Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD SKU UPC Model
Marc Paul on Aug 11, 2018.

lost the manual, I need another one
Allan on Oct 20, 2017.

Just bought this machine off craigslist. Guy says it hasn't worked since last service. Can see the idler was set up wrong and it looks like the belt is the wrong size. Hopefully this manual will help diagnosis and repair.
brandon on Oct 29, 2016.

good smowplower but can't find instructions on what oil to use and how to change the oil.
John Laverty on Jan 23, 2016.

good smowplower but can't find instructions on what oil to use and how to change the oil.
lloyd on Jul 04, 2015.

Good machine but missing the manual
clair leger on Mar 20, 2015.

i have had this for 4 winters now and we get a lot of snow here works great blows snow with easy even 3 to 4 feet of snow only prob is with heavy slushy snow it tends to plug up other than that can^t say a bad word about it.i would recomend this blower to anyone
Wayne on Feb 21, 2015. good snowblower

It is a good snowblower. I have had no trouble with it and I have had it for10 years
leo larochelle on Feb 13, 2013.


3 thoughts on “Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD”

  1. I have a model 31AE295-515 (60-3752-8) Series 1HO 21B20 775. Can you advise me as to the proper size for the belt for this model. Thank you James Maxim

    Reply

  2. I have a 28in snowblower I bought 3 years ago but I cant find a head light bulb to fit it

    Reply

  3. I have the owners manual 60-3754-4 which tells me I should change the oil every season but nowhere does it say how much oil to use, what type, where it goes or how to drain it.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website