Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD

•
•
To remove skid shoes, remove the four carriage
bolts and hex flange nuts which secure them to the
snow thrower. Reassemble new skid shoes with the
four carriage bolts (two on each side) and hex
flange nuts. Refer to Figures 19 and 21.
To remove shave plate, remove the carriage bolts,
cupped washers and hex nuts which attach it to the
snow thrower housing. Reassemble new shave
plate, making sure heads of carriage bolts are to
the inside of housing. Tighten securely.
•
Tip the snow thrower up and forward, so that it rests
on the housing. Remove two self-tapping screws
from the frame cover underneath the snow thrower
and move the frame cover away. See Figure 24.
Frame Cover
Replacing Belts
Check the condition of both auger belt and drive belt
every 25 hours of snow thrower operation. Replace if
either shows signs of wear and tear.
Auger Belt
Figure 24
•
Remove belt cover by removing the two self-
tapping screws that secure it to the snow thrower
housing. See Figure 22.
•
•
Half turn shoulder screw and slide it out of the
mounting bracket. See Figure 25.
Unhook spring to release tension on the auger belt.
Remove old belt and replace with new belt installing
it on the groove. See Figure 25.
•
•Drain the gasoline from the snow thrower, or place
a piece of plastic under the gas cap.
•
•
•
•
Wrap auger belt around the auger pulley. See
Figure 25.
Re-insert shoulder screw into the mounting bracket
and tighten to secure.
Wrap auger belt behind the idler. Reattach the
spring to the bolt where it was earlier secured.
Re-install frame cover and flip the snow thrower
back to the operating position.
Self-tapping Screws
•
•
Wrap auger belt around the engine pulley.
Re-install belt cover with self-tapping screws
removed before.
Figure 22
Take auger belt off the pulley as shown in Figure 23
Engine
Auger
Pulley
•
Pulley
Auger
Shoulder
Screw
Belt
Spring
Mounting Bracket
Figure 25
Drive Belt
•
Remove belt cover by removing the two self-
tapping screws that secure it to the snow thrower
frame. See Figure 22.
•
•
Drain the gasoline from the snow thrower, or place
a piece of plastic under the gas cap.
Take auger belt off the pulley as shown in Figure 23
Figure 23
17
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, Yardworks Snow Blower Manuals
Tags, , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 52 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandYardworks, 60-3753-6, 60-3754-4, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(8 votes, average: 3.88 out of 5)
Lawn and Garden readers have rated Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD 3.9 out of 5.0 based on 8 product reviews.
Submit your review (optional)
(will not be displayed)
12345
* Required Field
Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD SKU UPC Model
Marc Paul on Aug 11, 2018.

lost the manual, I need another one
Allan on Oct 20, 2017.

Just bought this machine off craigslist. Guy says it hasn't worked since last service. Can see the idler was set up wrong and it looks like the belt is the wrong size. Hopefully this manual will help diagnosis and repair.
brandon on Oct 29, 2016.

good smowplower but can't find instructions on what oil to use and how to change the oil.
John Laverty on Jan 23, 2016.

good smowplower but can't find instructions on what oil to use and how to change the oil.
lloyd on Jul 04, 2015.

Good machine but missing the manual
clair leger on Mar 20, 2015.

i have had this for 4 winters now and we get a lot of snow here works great blows snow with easy even 3 to 4 feet of snow only prob is with heavy slushy snow it tends to plug up other than that can^t say a bad word about it.i would recomend this blower to anyone
Wayne on Feb 21, 2015. good snowblower

It is a good snowblower. I have had no trouble with it and I have had it for10 years
leo larochelle on Feb 13, 2013.


3 thoughts on “Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD”

  1. I have a model 31AE295-515 (60-3752-8) Series 1HO 21B20 775. Can you advise me as to the proper size for the belt for this model. Thank you James Maxim

    Reply

  2. I have a 28in snowblower I bought 3 years ago but I cant find a head light bulb to fit it

    Reply

  3. I have the owners manual 60-3754-4 which tells me I should change the oil every season but nowhere does it say how much oil to use, what type, where it goes or how to drain it.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website