Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD

SECTION 2:  SETTING UP YOUR SNOW THROWER
NOTE:  The   snow  thrower  is  shipped   with  oil  and
WITHOUT   GASOLINE.    After   assembly,   refer    to
separate engine manual for proper fuel and engine oil
recommendations.
NOTE: If the connector is not properly assembled, the
shift rod will pivot and changing speed or direction of
the snow thrower will not be possible.
Unpacking
Cut along corners of the carton and lay it down flat.
Remove packing material.
Remove any loose parts included with unit (i.e.,
operator’s manual, etc.).
Roll unit out of carton. Check carton thoroughly for
any remaining loose part.
1
Panel varies
by model
Loose Parts
Your snow thrower has been assembled at the factory
except the parts shipped loose in the carton. These are
listed below.
a.   Electric Start Cord (optional)
b.   Shear Pins and Cotter Pins
Before Assembly
Disconnect spark plug wire and ground it against the
Figure 1
engine to prevent unintended starting.
NOTE: All references in this manual to the left or right
side of the snow thrower is from the operating position
only. Exceptions, if any, will be specified.
2
NOTE: This Operator’s Manual covers several models,
handle  panels,   lights  and   chute  cranks   are  some
features  that  may   vary  by  model.  Not   all  features
referenced   in   this   manual   are    applicable   to   all
snowthrower models.
Connector
Shift Rod
Setting up the Snow Thrower
Handle
1.
Observe the lower rear area of the snow thrower to
be sure both cables are aligned with roller guides
before pivoting the handle upward until it clicks into
the place. See Figure 1.
3
Handle Knob
2.
3.
Slide the shift rod connector down over the end of
the lower shift rod. Tap the connector until it locks
over the lower shift rod. See Figure 2.
Tighten two handle knobs firmly to secure the
upper handle to the lower handles. See Figure 1.
Figure 2
5
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, Yardworks Snow Blower Manuals
Tags, , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 52 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandYardworks, 60-3753-6, 60-3754-4, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(8 votes, average: 3.88 out of 5)
Lawn and Garden readers have rated Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD 3.9 out of 5.0 based on 8 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD SKU UPC Model
Marc Paul on Aug 11, 2018.

lost the manual, I need another one


Allan on Oct 20, 2017.

Just bought this machine off craigslist. Guy says it hasn't worked since last service. Can see the idler was set up wrong and it looks like the belt is the wrong size. Hopefully this manual will help diagnosis and repair.


brandon on Oct 29, 2016.

good smowplower but can't find instructions on what oil to use and how to change the oil.


John Laverty on Jan 23, 2016.

good smowplower but can't find instructions on what oil to use and how to change the oil.


lloyd on Jul 04, 2015.

Good machine but missing the manual


clair leger on Mar 20, 2015.

i have had this for 4 winters now and we get a lot of snow here works great blows snow with easy even 3 to 4 feet of snow only prob is with heavy slushy snow it tends to plug up other than that can^t say a bad word about it.i would recomend this blower to anyone


Wayne on Feb 21, 2015. good snowblower

It is a good snowblower. I have had no trouble with it and I have had it for10 years


leo larochelle on Feb 13, 2013.



3 thoughts on “Yardworks 603753-6 60-3754-4 Snow Blower Owners Manual by MTD

  1. I have a model 31AE295-515 (60-3752-8) Series 1HO 21B20 775. Can you advise me as to the proper size for the belt for this model. Thank you James Maxim

  2. I have a 28in snowblower I bought 3 years ago but I cant find a head light bulb to fit it

  3. I have the owners manual 60-3754-4 which tells me I should change the oil every season but nowhere does it say how much oil to use, what type, where it goes or how to drain it.

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website